colonyflow Level 129

Overview

Level 129 is a Normal five-color stage built around a castle fountain picture — a red and orange fountain on a cyan background. Cyan covers the largest share of the board, followed by orange and red in the middle layers, with brown and blue as the smaller accent colors and tiny trace colors scattered on top. The tiles are stacked in layers, so the clearing follows the fountain from the outside in: cyan leaves first, then red, then brown, then blue, and orange finishes at the bottom. With five colors competing for only five queue slots, disciplined queue switching is the whole challenge.

• Difficulty: Regular (Normal)
• Estimated moves: 20–30 taps

Step-by-Step Solution

1. Open with cyan. Cyan is the outermost background layer of the fountain picture, so nothing underneath it can be carried away until the backdrop tiles are gone. Tap the cyan tile and let the ants start the outer clear.
2. Move to red next. Red is the fountain tiers and sits just inside the cyan layer. Clear it in one push so the fountain starts taking shape.
3. Work the brown phase. Brown tiles were covered by the outer colors, so they only become reachable now. Clear brown in one continuous push and keep an eye on the queue.
4. Work blue next. Blue is the water accents and was covered by the brighter colors, so it only becomes reachable in the middle of the level. Clear blue in one push.
5. Clear the trace colors (yellow, green, pink, gray) as they are exposed. These small accents hide inside the fountain, and the efficient play is to spend free queue slots on them immediately so they never block a slot during the long cyan push.
6. Finish with orange. Orange is the bottom layer of the fountain, so it only becomes reachable at the very end. Sweep it in bulk; since it is the final color, it is safe to fill the queue with orange and let the ants finish the board. The fountain disappears completely and the level-complete overlay with five white input slots appears.

Strategy & Reasoning

The removal order is dictated by the layer geometry: cyan covers the backdrop, red sits on the fountain tiers, and orange is the bottom layer, so the sequence cyan → red → brown → blue → orange keeps the ants on reachable tiles. Cyan is the strategic bottleneck — it is the largest single area, and the correct play is to give it a long uninterrupted run while using spare queue slots for the small trace colors. Running cyan and red at the same time fills the five slots and stalls the ants. The speed-up button should stay active for the whole cyan phase, and tools like Magnet and Lightning exist only to rescue a jammed queue.

Tips & Common Mistakes

• Running cyan and red at the same time jams the five slots and stalls the board. Finish the backdrop before starting the fountain.
• Ignoring the small trace colors until the queue is full leaves an unmatchable tile blocking the line. Clear every exposed accent immediately with a free slot.
• Forgetting the speed-up button on the long cyan phase wastes time. Keep the 2x speed active for the whole background clear.

Key Frames