Brain Blow Level 94
📝 Walkthrough
Overview
A glass bottle holds a jumble of loose ship parts: a red hull lying diagonally, several striped sail panels, and thin masts and spars scattered among them. The prompt asks how you build a ship in a bottle. The pieces cannot be pushed through the narrow neck once the ship is built, so the model has to be assembled inside the bottle itself. In this level that assembly happens when you shake the device, and the scattered parts snap together into a finished sailing ship within the glass.
- Difficulty: Easy
- Estimated moves: 1
Step-by-Step Solution
- Read the prompt asking how to build a ship in a bottle, and look at the loose parts inside the glass. The red hull, striped sails, and masts are jumbled rather than arranged, so no completed ship is visible yet.
- Do not try to pull the pieces out through the bottle neck, and do not drag each sail and mast into place by hand. The narrow opening cannot pass a finished ship, and the parts are meant to be assembled inside the bottle.
- Shake your phone back and forth, as if shaking the bottle to rattle the loose pieces together.
- As the shake continues, the scattered hull, sails, and spars move and settle into position. The masts stand upright, the striped sails spread between them, and the red hull lines up along the bottom.
- Once the parts have snapped together into a complete sailing ship inside the bottle, the green checkmark appears over the model and the completion screen confirms the ship has been built.
- Keep shaking until the parts settle into a finished arrangement rather than releasing after one quick jolt: the masts must stand upright and the sails spread between them, with the hull lined up along the bottom. No drag handles or snap points appear on the individual pieces, which confirms manual fitting is not the intended control. The completed vessel should stay fully inside the glass; if any part hangs outside the neck, the model has not settled correctly yet. When the red-hulled, striped-sail ship is assembled within the bottle, the checkmark marks it as built.
Strategy & Reasoning
The level plays on the real tradition of ship-in-a-bottle models: the ship is too wide to fit through the neck after it is built, so it must be constructed within the bottle. The scattered pieces inside represent that unfinished model, and the puzzle asks how the assembly is triggered. The answer in the game is a physical shake of the device, which rattles the parts into their finished arrangement.
This explains why manually dragging the pieces is not the intended route: the game treats the shake as the action that sets the model together, rather than offering a piece-by-piece assembly interface. The bottle itself stays unchanged throughout; only the parts inside it reorganize. When the finished red-hulled, striped-sail sailing ship appears inside the glass, the checkmark marks that the model has been built as required.
Tips & Common Mistakes
- Shake the phone to assemble the parts; do not try to remove the ship through the bottle neck or drag pieces out.
- Keep shaking until the masts stand upright and the sails spread between them; a single quick shake may not finish the assembly.
- The completed ship should stay fully inside the bottle; if parts are hanging outside the neck, the model has not settled correctly yet.